Easy maintenance

The “Smart cooling ™”/ Refrigeration pre- cooling mist system is the most effective heat exchange pre- cooling system in the market. It not only chills the air around the systems, but it also humidifies the tubes with the chilled water vapour, presenting the fastest heat exchange method available. This system shows better results than other pre- cooling systems, and it can be used in all kinds of conditions – both dry and humid. As the tubes come into the contact with the water, our engineers predicted a serious corrosion problem with the tubes. Two years of studies and investigations were needed to elaborate to secure a cost effective solution to this problem. Only after an appropriate solution was found, did we start to work on the remaining system elements.

Note: Currently the longest functioning system (4 years)that we installed has relatively hard water, but still after 4 years the limestone has still not formed in the system.The system still works as efficiently as it did on the first day of operation.

41Still, a real challenge was to create a financially viable supplying system so that this method could work in combination with the small amount of water, which is used in our AC Pre-coolers. This was achieved with our partner – Chemical Corp- a leading company in industrial water treatment. We combine patented slow output technology –  with a new low capacity supplying system, which was developed by “Smart cooling ™”. This patented system allows a precise amount of additive to be added to the small amount of water. To effectively prevent the limestone formation; there is a corrosion oppressive system built into the system, which helps to protect the tubes from water minerals.

Note: In many cases, the tubes become cleaner than before because the treted water will easily be able to flush the tubes. The water will flush out the salt, the dust and other substances, which could accumulate and could impede the air stream and heat transfer.

To make sure that limestone or corrosion does not form on your tubes, we supply maintenance programmes for all our systems as well. In this way, we may test and fill repeatedly the water treatment system, when there is a need, as well as check the system and the tubes, making sure that everything works in a correct way to achieve the maximum benefits.

“Smart cooling ™” Technology

Usually innovations appear when an approved technology is used in a way that no one could imagine it up to now. “Smart cooling ™” Technology is one such innovation. “Smart cooling ™” Technology is based on diffusion. “Smart cooling ™” is a spare plate, which will provide a safe and controllable limestone/ corrosion oppressive substance inflow in the cooling systems during the period of 30- 90 days.


  • Technology approved by all leading manufacturers:

    york trane rhoss quay logo_guntner logo_al daikin carrier airwell lennox

  • Contact us:

    Please fill in this form





    Your Message

  • Our product brochure


    Email *

  • Scientific researches proving efficiency of product

    Here You can read several scientific researches about adiabatic cooling possibilities, obtained results using this effective method.

    Hong Kong Polytechnic University Study on Application of Water Mist Pre-Cooling on Air-Cooled Chillers.

    Colorado Springs Utilities Whitepaper on Pre-cooling

  • Look here, how Facebook uses this technology for its data center cooling purposes

  • Our customer reviews and case studies

    global_partnerSchneieder Electric logo

    Products ensured for Lexel factory
    Results: Energy consumption reduced by 31%, cooling capacity raised by 22%
    ROI = 7 month

    Read more…



    Products ensured for Philip Morris factory, Intertaba, Italy
    Results: Energy consumption reduced by 37%, cooling capacity raised by 35%
    ROI = 5 month

    Read more…